Fujitsu ETERNUS DX100 S3 - Page 205

Chapter 1 System Management
1.13 Remote Support Management (REMCS)
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
205
3 Click the [OK] button.
 The Remote Support is stopped.
4 Click the [Done] button to return to the screen when starting this function in Step 1.
End of procedure
■ Restarting Remote Support
This function restarts the Remote Support. The Remote Support can be restarted only when it is "Stopped". The
procedure to restart Remote Support is as follows:
Procedure
1 Click [Stop/Restart Remote Support] in [Action].
 The current Remote Support status is displayed.
2 Click the [Restart] button.
 A confirmation screen appears.
3 Click the [OK] button.
 The Remote Support is restarted.
4 Click the [Done] button to return to the screen when starting this function in Step 1.
End of procedure