Fujitsu ETERNUS DX100 S3 - Page 243

Chapter 2 Component Management
2.7 Add Channel Adapter Port
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
243
2 Click the [Next >>] button.
The displayed screen may vary depending on whether the installation of license key is required or not.
■ When the license key is not registered
 The [Register license of additional Channel Adapter Port] screen appears. Proceed to Step 3
.
■ When the license key is already registered
 The [Define additional Channel Adapter port] screen appears. Proceed to Step 5
.
3 Input the license key.