Fujitsu ETERNUS DX100 S3 - Page 261

Chapter 3 Volume Management
3.1 Create Volume
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
261
• Setting items when "Use all Largest Free Space" is specified
✓: Required settings
Blank: Settings that are not required
-: N/A
*1: The following items are advanced settings. It is not necessary to change the default setting for normal use.
• "Wide Stripe Size" and "Concatenation Order" under the "Manual Setting (Volume Information)" field.
• "Stripe Depth" under the "Manual Setting (Select RAID Group Information)" field.
Setting items Standard SDPV WSV (*1) Remarks
New Volume Name ✓✓✓
Capacity
Type ✓✓✓
Capacity of source
volume only
SDV
Allocation
RAID Group/TPP
Selection
Manual
Data Integrity ✓
Manual
Setting or
Manual
Setting
(Volume
Information)
Use all Largest
Free Space
✓✓✓
Volume No.
Encryption by CM
✓✓✓
"Off" (fixed) when the encryption
mode is disabled or when the drive
type is "Online SED", "Nearline SED", or
"SSD SED"
Number of
Volumes (RAID
group)
✓✓ –
Number of
Volumes (TPP)
–––
Number of
Volumes (WSV)
––✓
Manual
Setting
(Select RAID
Group
Information)
Drive Type – – ✓
RAID Level – – ✓
Number of
Member Drives
––✓