Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
397
■ When adding a host by manually specifying the host
(1) Click the [Manual Input] tab.
(2) Click the [Add] button.
The [Add iSCSI Host] screen appears.
(3) Manually specify the iSCSI host information of the host to be added.
The main setting item is as follows.
● Host Setting
• iSCSI Name
Refer to Step (2) (page 394) for other settings.
To Next Page
Loading...
