Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
412
The main setting items are as follows.
● Host Setting
• Checkbox to select a host
• Name
• Host Response
• IP Version
• IP Address
• Alias Name
• CHAP User ID
• CHAP Password
• Confirm CHAP Password
Filter setting
(3) Click the [Add] button.
A confirmation screen appears.
Filter Description
iSCSI Name
Input the iSCSI name that is to be displayed.
iSCSI hosts matching or partially matching the entered iSCSI name are displayed.
When not using the iSCSI name for filtering, leave this item blank.
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• The "Name" does not satisfy the input conditions
• The "Name" is already used for the registration target host or the same "Name" is already used in
the ETERNUS DX
• The "IP Address" does not satisfy the input conditions
• The "IP Address" is specified and an iSCSI host with the same "iSCSI Name" and "IP Address" is
already registered
• The "IP Address" is not specified and an iSCSI host with the same "iSCSI Name" and "IP Version" is
already registered
• The "Alias Name" does not satisfy the input conditions
• The "Alias Name" is already used for the registration target host or the same "Alias Name" is
already used in the ETERNUS DX
• The "CHAP User ID" does not satisfy the input conditions
• The "CHAP Password" does not satisfy the input conditions
• The "CHAP Password" and the "Confirm CHAP Password" do not match
• Either of the "CHAP User ID" or the "CHAP Password" has been specified
• The number of hosts that is to be registered is "0"
• The number of registered hosts has exceeded the maximum number for the ETERNUS DX
To Next Page
Loading...
