Chapter 4 Connectivity Management
4.3 CA Port Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
457
3 Click the [Modify] button.
A confirmation screen appears.
4 Click the [OK] button.
Modification of the FCoE port parameters starts.
5 Click the [Done] button to return to the [FCoE Port] screen.
■ Copying FCoE Port Parameters
The procedure to copy FCoE port parameters is as follows:
1 Select which FCoE ports to set the parameters for (multiple selections must be made) and
click [Configure FCoE Port] in [Action].
2 Set the copy source port parameters and then click the [Copy] button.
The [Copy Settings] screen appears.
To Next Page
Loading...
