Chapter 4 Connectivity Management
4.8 NAS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
521
The main setting items are as follows.
● Add Quota Target
- Type
- Name
- Drive Space
- File Count
3-3 Click the [OK] button
The display returns to the initial screen.
3-4 To set multiple quota settings for the selected NAS user volume, repeat Step 3-1 through Step 3-3.
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• The "Name" does not satisfy the input conditions
• The quota setting information with the same "Type" and "Name" already exists
• The "Warning" or "Limit" does not satisfy the input conditions
• The four threshold values for the drive space and the file count are all "0" or not specified
• In the initial screen, by re-clicking the [Add] button on the bottom right of the quota target list,
the quota setting information that was previously specified in the [Add Quota Target] screen is
displayed.
• If the [Type] link for the added quota setting information is clicked, the [Edit Quota Target]
screen is displayed. The quota setting information can be edited in the displayed screen.
• When deleting the added quota setting information from the quota target list, select the
relevant quota setting information, and click the [Delete] button.
If an error screen appears under the following conditions, check the parameter settings.
• NAS user volume for setting the quota is not selected
• Quota targets do not exist
• A quota setting information with the same "NAS user volume", the same "Type" of quota target,
and the same "Name" of the quota target already exists
To Next Page
Loading...
