Chapter 7 Advanced Copy Management
7.1 Start SnapOPC+
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
594
4 Check the displayed contents, and click the [Start] button.
A confirmation screen appears.
5 Click the [OK] button.
SnapOPC+ session starts.
6 Click the [Done] button to return to the [Advanced Copy] screen.
If an error screen appears under the following conditions, check the parameter settings.
• When the SnapOPC+ started in the copy source volume exceeds the maximum number of
generations per volume
• When the SnapOPC+ started in the copy source volume exceeds the maximum number of copy
sessions for the entire ETERNUS DX
To Next Page
Loading...
