Chapter 7 Advanced Copy Management
7.1 Start SnapOPC+
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
593
2 Click the [Browse...] button.
3 Select the radio button for the volume to be used, and click the [OK] button.
Perform Step 2 and Step 3 in the [Select Source Volume] screen and in the [Select Destination Volume]
screen.
In a Unified Storage environment, volumes that are used for the SAN and backup volumes that are
used in the NAS are displayed in the copy source volume list.
To Next Page
Loading...
