Fujitsu ETERNUS DX100 S3 - Page 671

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
671
A.1.3.3 Change Box ID
For details about this function, refer to "1.4.3 Change Box ID" (page 37).
For the factory default settings for this function, refer to "Appendix B Change Box ID" (page 972)
.
● Set Box ID
• Box ID
Description The Box ID setting of the ETERNUS DX is displayed.
If the ETERNUS DX is changed, correct the Box ID. The initial Box ID displayed is a 40-
digit code (device ID) that is created by combining device information (series name,
model, serial number, etc.).
If the Box ID entered is less than 40 characters, a "#" (hash key) is appended to the Box
ID for each character short.
Input condition/
Display contents
• Capital letters
• Numeric characters
• Spaces
• "#" (hash keys)
• Up to 40 characters
When spaces are input for the Box ID, the spaces are changed to "#" (hash keys).