Fujitsu ETERNUS DX100 S3 - Page 670

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
670
• Primary NTP Server (Domain Name / IP Address)
• Primary NTP Server (LAN Port used for NTP)
• Secondary NTP Server (Domain Name / IP Address)
• Secondary NTP Server (LAN Port used for NTP)
Description Input the domain name or the IP address of the primary NTP server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to "Available IPv6 Address" (page 107)
for details.
This item is only available when "Yes" is selected for "Synchronize with NTP Server".
Input condition/
Display contents
• For domain name
Up to 63 alphanumeric characters and symbols
• For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
• For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
Description Select which port is used to connect to the primary NTP server.
This item is only available when "Yes" is selected for "Synchronize with NTP Server".
Input condition/
Display contents
• MNT
• RMT
Description Input the domain name or the IP address of the secondary NTP server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to "Available IPv6 Address" (page 107)
for details.
This item is only available when "Yes" is selected for "Synchronize with NTP Server".
Input condition/
Display contents
• For domain name
Up to 63 alphanumeric characters and symbols
• For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
• For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
Description Select which port is used to connect to the secondary NTP server.
This item is only available when "Yes" is selected for "Synchronize with NTP Server".
Input condition/
Display contents
• MNT
• RMT