Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
718
● E-Mail Server Settings
• LAN Port used for SMTP Connection
• SMTP Server
• SMTP Port No.
• Sender E-Mail Address
• SMTP over SSL
• SMTP requires authentication
Description Input the LAN port number that is used for SMTP server.
Input condition/
Display contents
• MNT
• RMT
Description Specify the IP address or domain name of the SMTP server that is to be used.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to "Available IPv6 Address" (page 107)
for details. When the cur-
rent setting is displayed, the IPv6 address is displayed as an abbreviation.
Input condition/
Display contents
• For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
• For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
• For domain name
Up to 63 alphanumeric characters and symbols
Description Input the port number used by the SMTP server.
Input condition/
Display contents
1 - 65535
Description Input the E-Mail address of the ETERNUS DX.
Input condition/
Display contents
Up to 63 alphanumeric characters and symbols (except space)
Description Select the SMTP over SSL method.
Input condition/
Display contents
• None
• STARTTLS
• SSL/TLS
Description Select the authentication method to connect to the SMTP server.
Input condition/
Display contents
• None
• AUTH SMTP
To Next Page
Loading...
