Fujitsu ETERNUS DX100 S3 - Page 763

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
763
● Result Notification Information
• Administrator
• Connection check operator
• Connection check operator E-Mail Address
● Time Information
• SMTP Connection Timeout
• SMTP Response Timeout
Description Select "Notification" or "Not Notification" for your administrator of the setting
confirmation result at the REMCS center.
Select "Notification" for the "Administrator" or the "Connection check operator" and
confirm the result.
Input condition/
Display contents
• Notification
• Not Notification
Description Select "Notification (Standard E-Mail format)", "Notification (Simple E-Mail format for
cell phone)" or "Not Notification" for the connection check operator of the setting
confirmation result at the REMCS center.
If notifying, input the "Connection check operator E-Mail Address".
Specify the "Connection check operator" if there is another person who needs to be
notified of the setting confirmation result, other than the administrator.
Input condition/
Display contents
• Notification (Standard E-Mail format)
Input the "Connection check operator E-Mail Address"
• Notification(Simple E-Mail format for cell phone)
Input the "Connection check operator E-Mail Address"
• Not Notification
Description If notifying the connection check operator of the setting confirmation result at the
REMCS center, input the E-mail address.
Input condition/
Display contents
Up to 60 alphanumeric characters and symbols (except space)
The timer parameter settings do not normally require modification.
If changing the default value, select the "Change following Timing Parameter items" checkbox.
Description Input the timeout limit when using SMTP connection.
Input condition/
Display contents
• Numeric characters
• 1 - 600 sec.
Description Input the timeout limit for SMTP response.
Input condition/
Display contents
• Numeric characters
• 1 - 3600 sec.