Fujitsu ETERNUS DX100 S3 - Page 806

Appendix A Parameter List
A.3 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
806
● Select RAID Group Information
• Drive Type
• RAID Level
Description Select the type of drives that configure the RAID groups in the migration destination
WSV.
The installed drive determines the selectable drive types that are displayed.
If there are no RAID groups in which volumes can be created, the field is blank.
Input condition/
Display contents
• Online
• Nearline
• SSD
• Online/Nearline
• Online SED
• Nearline SED
• SSD SED
• Online SED/Nearline SED
• When "Online" is selected, a RAID group that is configured with only "Online" type drives, or a RAID group that is
configured with both "Online" and "Nearline" type drives is specified.
• When "Online SED" is selected, a RAID group that is configured with only "Online SED" type drives, or a RAID
group that is configured with both "Online SED" and "Nearline SED" type drives is specified.
• When "SSD" is selected, RAID groups that are configured with a single SSD type (SSD-M or SSD), or configured
with both SSD types (SSD-M and SSD) are specified.
• When "Online/Nearline" is selected, a RAID group that is configured with only "Online" type drives, a RAID group
that is configured with only "Nearline" type drives, or a RAID group that is configured with both "Online" and
"Nearline" type drives is specified.
• When "Online SED/Nearline SED" is selected, a RAID group that is configured with only "Online SED" type drives,
a RAID group that is configured with only "Nearline SED" type drives, or a RAID group that is configured with
both "Online SED" and "Nearline SED" type drives is specified.
Description Select the RAID group type that configures the migration destination WSV.
If there are no RAID groups in which volumes can be created, the field is blank.
Input condition/
Display contents
• High Performance (RAID1+0)
• High Capacity (RAID5)
• High Reliability (RAID6)
• Reliability (RAID5+0)
• Mirroring (RAID1)
• Striping (RAID0)