Appendix A Parameter List
A.3 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
807
• Number of Member Drives
• Stripe Depth
● Select RAID Groups
• Checkbox to select RAID groups
Description Select the number of member drives that configure the RAID groups in the migration
destination WSV.
The selectable number of member drives, which is determined by the specified RAID
level, is displayed.
If there are no RAID groups in which volumes can be created, the field is blank.
Input condition/
Display contents
• For High Performance (RAID1+0)
4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32
• For High Capacity (RAID5)
3 - 16
• For High Reliability (RAID6)
5 - 16
• For Reliability (RAID5+0)
6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32
• For Mirroring (RAID1)
2
• For Striping (RAID0)
2 - 16
Description Select the Stripe Depth of the drives that configure the RAID groups in the migration
destination WSV.
The selectable Stripe Depth varies depending on the specified RAID level. Refer to
"Available Stripe Depth value (for RAID group)" (page 913) for details.
If "Mirroring (RAID1)" is selected as the RAID level, a "-" (hyphen) is displayed.
If there are no RAID groups in which volumes can be created, the field is blank.
Input condition/
Display contents
• 64 KB
• 128 KB
• 256 KB
• 512 KB
• 1024 KB
Description Select the checkbox for the RAID group to be selected.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
To Next Page
Loading...
