Fujitsu ETERNUS DX100 S3 - Page 863

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
863
- TCP Port No.
- TCP Window Scale
- iSNS Server
- iSNS Server Port No.
- Jumbo Frame
Description Input the TCP port number of IP#n (n: 1 - 15).
Click the [Default] button to set the default TCP port number.
Input condition/
Display contents
0 - 28671
Description Select the TCP Window Scale of IP#n (n: 1 - 15).
For details about parameter settings, refer to "TCP/IP Settings" (page 849)
.
Input condition/
Display contents
0 - 14
Description Select whether to enable the use of an iSNS server with IPv4 or IPv6, or disable the
use of an iSNS server for IP#n (n: 1 - 15).
When "IPv4" or "IPv6" is selected, input the IP address of the iSNS server.
For details about parameter settings, refer to "TCP/IP Settings" (page 849)
.
Input condition/
Display contents
• IPv4
• IPv6
• Disable
• When "IP Version" is "IPv4" or "IPv4 / IPv6", "IPv4" and "Disable" can be selected.
• When "IP Version" is "IPv6" or "IPv4 / IPv6", "IPv6" and "Disable" can be selected.
Description When the iSNS server for the IP#n (n: 1 - 15) is "IPv4" or "IPv6", input the port
number of the iSNS server.
Click the [Default] button to set the default iSNS server port number.
Input condition/
Display contents
0 - 65535
Description Select whether to "Enable" or "Disable" the Jumbo Frame for IP#n (n: 1 - 15).
For details about parameter settings, refer to "TCP/IP Settings" (page 849).
Input condition/
Display contents
• Enable
• Disable
The same iSCSI name cannot be set to multiple iSCSI ports except the device iSCSI name.