Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
888
• SMB Encryption of Data Access
• Access Based Enumeration
Description When performing SMB encryption for data while accessing the shared folder, select
"Enable". When not encrypting, select "Disable".
This setting becomes available when the protocol is "CIFS" or "CIFS/NFS".
Input condition/
Display contents
• Enable
• Disable
• If a client does not support SMB3.0 or SMB3.1, accessing a shared folder where "Enable" is selected for "SMB
Encryption of Data Access" is not available.
• Note that the system performance may be reduced when "Enable" is selected for this item.
• If this setting is changed for existing shared folders, sessions that have access to relevant shared folders are
temporarily disconnected. However, if sessions that have already been accessing shared folders exist, the
ETERNUS DX waits for these sessions to complete.
Description To hide the shared folders and directories that cannot be accessed according to the
access control list (ACL function), select "Enable". To display inaccessible shared folders
and directories, select "Disable".
This setting becomes available when the protocol is "CIFS" or "CIFS/NFS".
Input condition/
Display contents
• Enable
• Disable
If this setting is changed for existing shared folders, sessions that have access to relevant shared folders are
temporarily disconnected.
To Next Page
Loading...
