Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
889
• CIFS Allowed Hosts
• CIFS Denied Hosts
Description Input all of the hosts that are allowed access to the shared folder by using the CIFS
protocol.
When this parameter is omitted, access from all hosts are allowed. To specify multiple
hosts, separate each input value with a comma (0x2C). Refer to "Method for inputting
hosts" (page 886) for details.
Input condition/
Display contents
• IP address, FQDN, or host name
• Alphanumeric characters and symbols (0x20 - 0x7E in the US-ASCII format)
(except the question mark (0x3F) and the backslash (0x5C))
• Up to 1023 characters
Note that any commas (0x2C) that are used to separate the values are also included
in the number of characters.
• This item is available when "CIFS" or "CIFS/NFS" is selected as the protocol.
• Specify all the hosts that have already been allowed access, and hosts that will be allowed access.
• If both "CIFS Allowed Hosts" and "CIFS Denied Hosts" are omitted, access from all hosts is allowed.
• If the same host is specified for both "CIFS Allowed Hosts" and "CIFS Denied Hosts", access from the relevant host
is allowed because the "CIFS Allowed Hosts" setting has priority.
Description Input all of the hosts that are denied access to the shared folder by using the CIFS
protocol.
To specify multiple hosts, separate each input value with a comma (0x2C). Refer to
"Method for inputting hosts" (page 886) for details.
Input condition/
Display contents
• IP address, FQDN, or host name
• Alphanumeric characters and symbols (0x20 - 0x7E in the US-ASCII format)
(except the question mark (0x3F) and the backslash (0x5C))
• Up to 1023 characters
Note that any commas (0x2C) that are used to separate the values are also included
in the number of characters.
• This item is available when "CIFS" or "CIFS/NFS" is selected as the protocol.
• Specify all the hosts that have already been denied access, and hosts that will be denied access.
• If both "CIFS Allowed Hosts" and "CIFS Denied Hosts" are omitted, access from all hosts is allowed.
• If the same host is specified for both "CIFS Allowed Hosts" and "CIFS Denied Hosts", access from the relevant host
is allowed because the "CIFS Allowed Hosts" setting has priority.
To Next Page
Loading...
