Fujitsu ETERNUS DX100 S3 - Page 896

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
896
A.4.7.7 Set Authentication Server
For details about this function, refer to "4.8.9 Set Authentication Server" (page 515).
● Active Directory (Kerberos) Authentication Settings
• Domain Name
• Domain Administrator
• Change Password
• Domain Administrator's Password
• Confirm Password
Description Input the domain name of the Active Directory authentication server.
Input condition/
Display contents
Up to 255 alphanumeric characters and symbols (0x20 - 0x7E in the US-ASCII format)
(except the question mark (0x3F) and the backslash (0x5C))
Description Input the administrator name for Active Directory authentication server management.
Input condition/
Display contents
Up to 255 alphanumeric characters and symbols (0x20 - 0x7E in the US-ASCII format)
(except the question mark (0x3F) and the backslash (0x5C))
If the domain administrator's name is changed, the password must also be changed.
Description To change the administrator password for Active Directory authentication server, select
the checkbox.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Description Input the administrator password for the Active Directory authentication server
management.
When the domain administrator's password is specified, select the "Change Password"
checkbox.
Input condition/
Display contents
• Up to 255 alphanumeric characters and symbols (0x20 - 0x7E in the US-ASCII format)
(except the question mark (0x3F) and the backslash (0x5C))
• When the domain administrator's password is specified
Select the "Change Password" checkbox.
Description Input the same password as the "Domain Administrator's Password" field for the Active
Directory authentication server.
Input condition/
Display contents
Up to 255 alphanumeric characters and symbols (0x20 - 0x7E in the US-ASCII format)
(except the question mark (0x3F) and the backslash (0x5C))