EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Page 895

Fujitsu ETERNUS DX100 S3
1082 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
895
A.4.7.6 Set DNS Server
For details about this function, refer to "4.8.8 Set DNS Server" (page 513).
DNS Server Settings
Primary IP Address
Secondary IP Address
IPv6 Primary IP Address
IPv6 Secondary IP Address
Primary IP Address Input the primary IP address of the DNS server that is used for operation LAN. Specify the
IP address with the IPv4 format.
Note that the IPv4 address cannot be the same as the secondary IP address.
Input condition/
Display contents
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
Description Input the secondary IP address of the DNS server that is used for operation LAN. Specify
the IP address with the IPv4 format.
Note that the IPv4 address cannot be the same as the primary IP address.
Input condition/
Display contents
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
Description Input the primary IP address of the DNS server that is used for operation LAN. Specify the
IP address with the IPv6 format.
The following IPv6 addresses can be used; "global address" or "unique local address".
Refer to "Available IPv6 Address" (page 107)
for details. When the current setting is
displayed, the IPv6 address is displayed as an abbreviation.
Note that the IPv6 address cannot be the same as the secondary IP address.
Input condition/
Display contents
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
Description Input the secondary IP address of the DNS server that is used for operation LAN. Specify
the IP address with the IPv6 format.
The following IPv6 addresses can be used; "global address" or "unique local address".
Refer to "Available IPv6 Address" (page 107)
for details. When the current setting is
displayed, the IPv6 address is displayed as an abbreviation.
Note that the IPv6 address cannot be the same as the primary IP address.
Input condition/
Display contents
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals