[Enable] is set to off as the factory default.
When [Enable] is set to on, specify the following items:
● Host Name/IP address
● Port Number
The factory default setting is "20444".
[Check connection] button
Check if the scanner is connected to Scanner Central Admin Server.
Network Encryption
Specify whether to encrypt network communications.
● Encryption Off (HTTP)
This is a transmission method prioritizing the scanning speed.
This is the factory default setting.
● Encryption On (HTTPS)
This is a transmission method prioritizing the security. The scanning speed is slow with this setting.
Check connection (Ping)
Check the communication status between the scanner and the connected computer.
Host Name/IP address
Enter a host name or an IP address.
[Run] button.
A ping test is performed.
Scanner Settings (Touch Screen)
226
To Next Page
Loading...
Need help?
General
