Fujitsu fi-7300NX User Manual

PaperStream NX Manager
Configure the settings for PaperStream NX Manager.
Set this item to use PaperStream NX Manager.
PaperStream NX Manager
Enable
Specify whether to use PaperStream NX Manager.
[Enable] is set to off as the factory default.
When [Enable] is set to on, specify the following items:
● Host Name/IP address
● Port Number
The factory default setting is "20447".
[Check connection] button
Check if the scanner is connected to PaperStream NX Manager.
Auto Login/Logout
Specify an auto login method or set the auto logout time for PaperStream NX Manager.
Auto Logout minutes
Specify a time (minutes) to automatically log out from PaperStream NX Manager if the
scanner is left on for a certain period of time without being used.
● Disabled (Never)
This is the factory default setting.
● 1
● 2
● 3
Auto Login
Specify an auto login method for PaperStream NX Manager.
● Disabled
This is the factory default setting.
● Username/Password
● Job Group Code
Scanner Central Admin Server
Configure the settings for Scanner Central Admin Server to use PaperStream NX Manager.
Set this item to monitor the scanners or perform a single operation on them at the same time with
Scanner Central Admin Server.
Enable
Specify whether to use Scanner Central Admin Server.
Scanner Settings (Touch Screen)
225

Fujitsu fi-7300NX Specifications

General

Brand	Fujitsu
Model	fi-7300NX
Category	Scanner
Language	English