EasyManua.ls Logo

Fujitsu fi-7300NX

Fujitsu fi-7300NX
311 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Specification
Wi-Fi For details, refer to Specifications of Wi-Fi (page
304).
Network protocol (wired LAN, Wi-Fi) IPv4 (*6), TCP, UDP, ICMP, DHCP, DNS
HTTP/HTTPS
Touch screen 4.3-inch TFT color touch screen
Pressure-sensitive
Contactless Smart Card Reader Communication mode
Compliant with the ISO/IEC 14443 Type A/Type B
Compliant with the ISO/IEC 18092
*1:Long page scanning supports documents with a length up to 5,588 mm (220 in.) when the resolution is set
to 200 dpi or lower.
*2:Up to three plastic cards can be loaded in the ADF paper chute (feeder).
*3:Note that this is the hardware limitation, and the software's processing time such as data transfer time is
added to the actual time of scanning.
*4:The capacity varies depending on the paper weight.
For details, refer to Documents for Scanning (page 79).
*5:Use the USB cable that is supplied.
When connecting the USB cable to a USB hub, make sure you connect it to a USB hub that is connected to
the USB port of a computer.
Connection with USB 3.1 Gen 1/USB 3.0/USB 2.0 requires the USB port and the hub to support USB 3.1 Gen
1/USB 3.0/USB 2.0.
Also note that the scanning speed slows down when USB 1.1 is used.
*6:IPv6 is not supported.
Specifications of Wi-Fi
Item Specification
Observed standards IEEE802.11a
IEEE802.11b
IEEE802.11g
IEEE802.11n
IEEE802.11ac
Communication mode Infrastructure mode (*1)
Frequency 2.4 GHz band
5 GHz band (*2)
Channel 2.4 GHz band: 1 to 13 ch
5G Hz band: 36 to 60, 100 to 140, 149 to 165 ch (increments of 4 ch)
Appendix
304

Table of Contents

Other manuals for Fujitsu fi-7300NX

Related product manuals