Troubleshooting and tips
The printer does not print
Printerdoe s notprint
Cause Troubleshoot ing
The printer is not sw itched on. ► Make sure that the printer is switc
hed
on and read y for operation (refer
to the
documentation supplied with the
printer).
The printer is not conn ected corr
ectly.
► Ch eck that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong p rinter driver.
► Ch eck that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the co rrect printer driver is
loaded (refer to the printer documentation).
The radio connection to a n
etwork does not work
Theradioc onnecti
ontoa networkdoes notwork
Cause Troubleshoot ing
The wireless c omponen t is di
sabled.
► Switch the radio component on (see
"
Switching the wireless components on and
off", Page 69).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
► Ch eck whether the radio conn ection is
switched on via the software.
► F urther informa tion on using the radio
component can be fou nd in the help files.
The battery discharges
too quickly
Battery:
Cause
Troubleshooting
The batt ery is either too
hot or too cold. In this
case the battery indica
tor flashes.
► Bring the notebook up/down to a normal
temperature again.
► If the operating time of the ba ttery life is
extremely s hort, the battery is probably too
old. Replace battery if necessary.
You may have an application running th at
consumes a great deal of power due to frequent
accessing of the hard disk or optical d rive.
► Use the m ains adapter as frequent ly as
possible.
The maximum brightn ess may have been set
for the screen.
► Set the screen slightly darker with the
key combination for De creasing the screen
brightness in order to reduce the amount of
power being drawn.
116 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General