Fujitsu FPCM11752 Operating Manual

Security functions
Installing SystemLock
InstallingS ystemLock
During initial installation, the first SmartCard becomes the Admin SmartCard. Togethe r with the
PUK, it has all access rights, and should therefore be kept in a safe place. It must only be
used by an authorised user (Administrator), for instance to initialise user cards.
You need an Admin SmartCard if you want to set up a u ser group. You use this
Admin SmartCard to add further systems to the user group.
Setting up the first system in a user grou p or a stand-alone
system for us e with SystemLock
Usergroups
► Start the device and call up BIOS Setup.
► From the Security menu, choose the option SmartCard SystemLock.

The following SmartCa rd SystemLock menu will be displayed:
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Not Installed
Install Single PC [Enter]
Install Group PC [Enter]
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
required for a
permanent installation.
Enter PIN: [ ]
► In sert a new SmartCard in the reader a nd press Enter.
86 Fujitsu Technology Solutions

Fujitsu FPCM11752 Specifications

General

Brand	Fujitsu
Model	FPCM11752
Category	Laptop
Language	English