Working with the notebook
Using the power-management features
PowerPowerBattery
The notebook uses less power when the available power-management features are used. You
will then be able to work longer when using the battery be fore having to recharge it.
Power efficiency is increased an d environmental pollution reduced. By
choosing the best power options, you can make significant savings and
at the same time help protect the environment.
When you fold down and close the LCD screen, depending on the setting in W indows,
the notebook au tomatically enters a power saving mode.
We recommend the following settings:
Function On external power On battery power
Turn off mon itor After 10 minutes After 5 minutes
Turn off hard disk(s) After 15 minutes After 10 minutes
Energy saving (S3) After 20 minutes After 15 minutes
Hibernate mode (S4) After 1 hour After 30 minutes
► Select the power management functions in your C ontrol Panel.
► Select the Screen Saver in your Control Panel.
or
► R ight-click on the desktop. Switch on the screen saver by clicking Personalization –
Change screen saver.
If you need further information about an option, you can get help with most
settings by pressing
F1
to op en the Micros oft Help.
When the noteb ook is in power-saving mode, the following mu st be remembered:
During power saving mode, open files are he ld in the main memory
orinaswapfile on the hard disk.
Never turn off your notebook while it is in a power saving mode. If the built-in battery is
nearly flat, close the open files and do not go into power saving mode.
If you do not intend to use your notebook for a long period of time:
► Exit po wer saving mode if necessary via the mouse or keyboard or by switching on the
notebook.
► C lose all opened programs and completely shut down the notebook.
62 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General