First-time setup of your device
Selecting a location
SelectingalocationDeviceM ainsadapter
Select a suitable location for the device before s etting it up. Follow
the instructions below when doing so:
• Never place the device or the m ains adapter on a heat-sensitive surface.
The s urface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The und erside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm away from the device and its
mains adapter to en sure adequate ventilation.
• Never cover t he ventilation slots of the device.
• Do not exp ose the device to extreme environmental conditio ns. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingf or operationMainsadapt er
Observe the safety precautions in the enclosed "Safety" manual.
The supplied power cable conforms to the requireme nts of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
1
2
► Connect the power cable (1) to the
mains adapter.
► Plug the m ains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
18 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General