Fujitsu FPCM11752 Operating Manual

Working with the notebook
Module
ModulebayModules
The design of your notebook enables the fle xible use of notebook ba tteries and drives. The
following mo dules can be operated in the module bay o f your notebook:
• Seco n d battery
• Secon d hard disk drive
• Optical drive
• Empty plug-in unit (save weight)
Only use modules designed for your notebook.
Do not use force when installing or removing the module.
Make sure that no foreign objects enter the module bay.
You can swap modules during operation. This means you do not
need to sw itch off the notebook.
To replace a module, simply click on the corresponding icon in the
task bar an d then o n Exit or Select - Exit.
The module can now be removed without any further actions being necessary.
Removing a m odule
1
2
ModuleDriveWeigh tS
aver
► Slide the release mechanism (1) in the direction of the arrow and hold.
► Now pull the module (2) out of the module ba y.
Fujitsu Technology Solutions 57

Fujitsu FPCM11752 Specifications

General

Brand	Fujitsu
Model	FPCM11752
Category	Laptop
Language	English