Working with the notebook
Installing a module
► Place the module into the module bay so that the contacts enter first.
► Push the module into the modu le bay until you feel it locking into place.
Optical drive
Opticaldrive
This pro duct contains a light emitting diode, classified in accordance with IEC
8251:1993: LASER C LASS 1, and must therefore not be opened.
Handling data carrie
rs
Handling
Observe the following guidelines when handling data carriers:
• Avoid touching the s urface of a data carrier. Only handle data carriers by their edges.
• Always store data carr
iers in their cases. This will protect the data carrier against
being covered in dust,
scratched or damaged in any other way.
• Protect your data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data car
rier in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm data carriers in the optical drive.
When using a data carrier of lesser qua lity, vibrations and reading errors may occur.
58 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General