Fujitsu Primergy BX900 S2 - Removing a Double-Width Connection Blade; Installing Connection Blade Dummy Modules

124 Upgrade and Maintenance Manual BX900 S2
Connection blades
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13659-001.fm
8.3.2.3 Removing a double-width connection blade
Figure 29: Removing a double-width connection blade
Ê Unlock the locking lever (1) and open the release lever (2).
Ê Carefully remove the connection blade from its slot.
8.3.2.4 Installing connection blade dummy modules
Figure 30: Installing the separating clip between the connection blade slots
Ê Install the separating clip between the slots.
Ê Install the connection blade dummy modules into the unused slots as
described in section "Installing a connection blade dummy module" on
page 117.
/
0