Fujitsu Primergy BX900 S2 - Removing the Local Service Display

152 Upgrade and Maintenance Manual BX900 S2
Local Service Display
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13663-001.fm
Ê Shut down the system unit as described in section "Shutting down the
system unit" on page 49.
Ê Remove the AC power cords from the cable ties and disconnect them from
the PSUs as described in section "Disconnecting the power cords" on
page 49.
10.1.3 Removing the Local Service Display
Figure 49: Removing the Local Service Display stop
Ê Loosen the screw (1) to remove the Local Service Display stop.
/