Fujitsu Primergy BX900 S2 - Configuring Power Supply Redundancy

BX900 S2 Upgrade and Maintenance Manual 81
Basic software procedures
5.2.10 Configuring power supply redundancy
Ê Login to the management blade web interface, see section "Accessing the
management blade web interface" on page 44.
Ê Open the Information/Operation – Operation – Power Management menu,
select the Configuration tab and scroll to the Power Consumption Options box.
Ê Select the redundancy mode In the Redundancy check box.
I How many PSUs need to be installed to provide power supply
redundancy depends on the number of server blades, see section
"Power supply redundancy" on page 86.
For detailed information on power management, refer to the
"PRIMERGY BX900 Blade Server Systems ServerView
Management Blade S1 User Interface Description".