Fujitsu Primergy BX900 S2 - Saving Connection Blade Settings

To Next Page

To Previous Page

76 Upgrade and Maintenance Manual BX900 S2

Basic software procedures

5.2.7 Saving connection blade settings

After replacing and configuring a connection blade you must create a backup

copy of the connection blade settings.

Saving out-of-band connection blade settings

Perform the following steps to create a backup copy of the out-of-band

configuration data of a connection blade.

Ê If not done yet, login to the management blade web interface, see section

"Accessing the management blade web interface" on page 44.

Ê Open the System – Connection Blades – Connection Blade-x menu for the

desired connection blade.

Ê Open the Backup/Restoration tab.

Ê In the Backup Configuration box of the Connection Blade Out-Of-Band

Configuration frame select the backup medium.

– Select Memory to store the backup file in the management blade memory.

– Select USB to store the backup file in a USB memory stick.

I This option is only displayed if a USB memory stick is connected

to the management blade.

– Select Local File to store the backup file in the file system of the field

service terminal.

I The filename of the backup copy will be automatically generated

consisting of an identification tag and the current date and time.

Ê Click the Backup button.

Saving enhanced connection blade settings