204 Upgrade and Maintenance Manual BX900 S2
Appendix
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13668-001.fm
13.4 Management Blade Settings
Figure 94: Management Blade DIP switch (a)
The management blade is delivered with the DIP switches set in the following
positions:
Switch Function Default
1 Flash Swap - activates the second management blade boot ROM.
The second boot ROM can be used as reserve, if a management
blade firmware update has failed.
OFF
2 Recovery Mode - firmware update OFF
3 Default Set - loads the standard management blade configuration (IP
address, password, ...)
OFF
4 Clear Password - clear user defined password OFF
5 Diagnostic Mode - activates the diagnostic mode OFF
6 Not defined OFF
a
To Next Page
Loading...
