BX900 S2 Upgrade and Maintenance Manual 151
10 Local Service Display
This chapter provides information on how to replace the ServerView Local
Service Display for Blade (hereinafter referred to as Local Service Display).
Safety notes
V CAUTION!
● When inserting the Local Service Display into the system unit, ensure
not to pinch or strain any connected cables.
● For further information, please refer to chapter "Important
information" on page 29.
10.1 Replacing the Local Service Display
10.1.1 Required tools
● Preliminary and concluding steps: tool-less
● Replacing the Local Service Display:
– PH0 / (+) No. 0 screw driver
10.1.2 Preliminary steps
Before replacing the Local Service Display, perform the following steps:
Ê If applicable, open the rack door as described in section "Opening the rack
door" on page 48.
Ê Locate the desired system unit as described in section "Determining the
error class" on page 45.
Field Replaceable Units (FRU)
Average task duration: 15 minutes
To Next Page
Loading...
