122 Upgrade and Maintenance Manual BX900 S2
Connection blades
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13659-001.fm
8.3.1.5 Concluding steps
Perform the following procedures to complete the task:
Ê Install the QSFP transceiver modules as described in section "Installing
SFP+ transceiver modules" on page 127
Ê Connect the external cables to the connection blade.
Ê If applicable, close the rack door as described in section "Closing the rack
door" on page 60.
Ê Configure the connection blade settings as described in section "Configuring
connection blade settings" on page 75.
Ê Create a backup copy of the connection blade settings as described in
section "Saving connection blade settings" on page 76.
To Next Page
Loading...
