Fujitsu Primergy BX900 S2 - Viewing and Clearing the System Event Log (SEL); Viewing the SEL

BX900 S2 Upgrade and Maintenance Manual 71
Basic software procedures
5.2.3 Viewing and clearing the System Event Log (SEL)
5.2.3.1 Viewing the SEL
You can view the System Event Log (SEL) of the management blades and
server blades using the management blade web interface and ServerView
Operations Manager frontend:
Viewing the SEL using the management blade web interface
Ê Enter the management blade web interface, see section "Accessing the
management blade web interface" on page 44.
Ê Select the Components – System – Management Blades – Management Blade-x
menu or the Components – System – Server Blades – Server Blade-x menu and
open the Event Log tab.
Ê In the Event Log Content box the SEL is being displayed.
Ê In the Event Log Filter box select the message type(s) you want to display:
– All events
– Informational
–Minor
– Major
–Critical
Viewing the SEL in ServerView Operations Manager
Ê In ServerView Operations Manager Single System View select Maintenance
from the Information / Operation menu.
Ê Under Maintenance select System Event Log.
Ê Select the message type(s) you want to display:
– Critical events
– Major events
– Minor events
– Informational events
I For detailed information on how to view and sort the SEL using
ServerView Operations Manager, refer to the "ServerView Operations
Manager - Server Management" user guide.