184 Upgrade and Maintenance Manual BX900 S2
Appendix
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13668-001.fm
13.3.2.2 Control elements and indicators on the management blade
Figure 78: Control elements and indicators on the management blade
1 Status indicator (yellow)
Lights up when the management blade is active (master)
Blinks when the management blade is defective.
Is not lit when the management blade is not active (slave)
2 LAN link indicators (service LAN port)
Lights up green if a LAN connection exists.
Does not light up if no LAN connection exists.
3 LAN activity indicators (service LAN port)
Flashes yellow for a LAN transfer is in progress.
Does not light up for no LAN transfer.
4 Global Error indicator (orange)
– Lights up orange if a prefailure event has been detected that
requires (precautionary) service intervention.
– Flashes orange if an error was detected that requires service
intervention.
– Does not light up if there is no critical event.
If the event is still acute after a power cycle, the indicator is activated
after the restart.
The indicator also lights up in standby mode.
You can find more details on the indicated errors in the System Event
Log (SEL), in the Management Blade Web interface, on the ServerView
Local Service Panel, on the ServerView Local Service Display, in the
ServerView Operations Manager or via the iRMC S2/S3's Web
interface.
12 3 45 6 78 91011
To Next Page
Loading...
