Fujitsu Primergy BX900 S2 - 5.3 Connecting Devices to the System Unit; Ports on the Back and Front of the System Unit

60 Upgrade and Maintenance Manual BX900 S2
Basic hardware procedures
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13654-001.fm
Figure 11: Installing a dummy server blade module
Ê Push the dummy server blade into the empty slot until it clicks into place.
4.7 Concluding software tasks
Ê Perform the following software tasks to put the system unit back in
operation:
– "Verifying the management blade time settings" on page 70
– "Viewing and clearing the System Event Log (SEL)" on page 71
4.8 Closing the rack door
The PRIMECENTER rack is equipped with a split front door. The left-hand door
contains an interlocking system that can be locked and opened with a key.
Optionally, a revolving door knob can be mounted for key-less locking. To close
and lock the rack, proceed as follows:
Ê Close the right-hand door first, then the left-hand door.
1