BX900 S2 Upgrade and Maintenance Manual 183
Appendix
13.3.2 Back of system
13.3.2.1 Connectors on the management blade
Figure 77: Connectors on the management blade
I The service LAN port and the LAN ports for blade server management
must be in different LAN subnetworks.
It is recommended to operate the management blade user interface in a
separate broadcast domain for the server management.
1 Service LAN port (as a point-to-point connection, for system unit
administration only, no access to server blades and connection blades)
2 USB ports for backing up and restoring the MMB configuration and for
access to logging information
3 Serial port for a local management console
4,5 LAN ports for blade server management (including server blades and
connection blades). Customers must use the Up port (4) while the Down
port (5) is reserved for service personnel.
123 45
To Next Page
Loading...
