Fujitsu Primergy BX900 S2 - Locating the Defective Component; Opening the Rack Door

To Next Page

To Previous Page

48 Upgrade and Maintenance Manual BX900 S2

Basic hardware procedures

4.1.4 Locating the defective component

After determining the error class by the CSS or Global Error indicators (see

section 4.1.3 on page 45) locate the defective component. There are two ways

to do this.

– Local diagnostic indicators on the PSUs, fan modules, connection blades

and management blades allow you to identify the defective component (see

section "Connectors and indicators" on page 179).

– In the management blade web interface, errors and warnings are displayed

simultaneously in the status frame, the navigation frame and the main frame,

see the "PRIMERGY BX900 Blade Server Systems ServerView

Management Blade S1 User Interface Description" manual.

I For information about upgrading and maintaining server blades and

storage blades, please refer to the relevant upgrade and maintenance

manuals.

4.2 Opening the rack door

I The following description only applies to the PRIMECENTER rack. For

further instructions on opening or closing the 19-inch rack, please refer

to the "19-inch Rack for PRIMERGY and RM systems" assembly guide,

available online at http://manuals.ts.fujitsu.com or from the ServerView

Suite DVD 2 supplied with your PRIMERGY server.

The PRIMECENTER rack is equipped with a split front door. The left-hand door

contains an interlocking system that can be locked and opened with a key.

Optionally, a revolving door knob can be mounted for key-less locking. To

unlock and open the rack, proceed as follows:

Ê Insert and turn the key by counter-clockwise by 180 degrees.

If applicable, turn the door knob counter-clockwise by 180 degrees.

Ê Open the left-hand door first, then the right-hand door.

I For further information, refer to the "PRIMECENTER Rack System"

assembly guide available online at http://manuals.ts.fujitsu.com or from the

ServerView Suite DVD 2 supplied with your PRIMERGY server.

Other manuals for Fujitsu Primergy BX900 S2