Fujitsu Primergy BX900 S2 - Control Elements on the Local Service Display

180 Upgrade and Maintenance Manual BX900 S2
Appendix
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13668-001.fm
Figure 76: ServerView Local Service Display
The control elements and indicators can also be found on the front of the Local
Service Display. This means they are also available when it is folded away.
I The control and display elements of the server blades and storage
blades are described in the relevant operating manuals.
13.3.1.1 Control elements on the Local Service Display
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V CAUTION!
Risk of loss of data!
I The On/Off button does not disconnect the server from the
mains voltage. To disconnect from the mains completely,
remove the power plug(s).
ID ID button
Lights up (blue) on the front and on the rear of the system unit when
the ID button is pressed. The two ID indicators are synchronized.