Fujitsu Primergy BX900 S2 - Configuring Connection Blade Settings

BX900 S2 Upgrade and Maintenance Manual 75
Basic software procedures
5.2.6 Configuring connection blade settings
Configuring out-of-band settings of a connection blade
Ê Login to the management blade web interface, see section "Accessing the
management blade web interface" on page 44.
Ê Open the Components – System – Connection Blades – Connection Blade-x
menu for the desired connection blade.
Ê Open the Configuration tab.
Ê Edit the configuration settings. For information on the configuration
parameters, please refer to the Help – On Page function of the management
blade web interface.
Configuring enhanced connection blade settings
Ê If applicable, login to the management blade web interface, see section
"Accessing the management blade web interface" on page 44.
Ê Open the System – Connection Blades – Connection Blade-x menu for the
desired connection blade.
Ê Open the Blade Information tab.
Ê Click the Administrative URL.
The file manager obtains access to a the connection blade web interface.
For detailed information, please refer to the relevant connection blade
manual.