BX900 S2 Upgrade and Maintenance Manual 57
Basic hardware procedures
4.6.2 Installing a single height / double width Blade
The following describes how to install a BX960 S1 server blade. This server
blade occupies 2 bays one upon the other in the BX900 S2 system unit.
Figure 8: Installing a BX960 S1 server blade
Ê Undo the locking mechanism of the release lever (1).
Ê Open the release lever (2).
Ê Push the server blade as far as possible into the empty slot (3).
1
2
3
To Next Page
Loading...
