Fujitsu Primergy BX900 S2 - Removing Connection Blade Dummy Modules; Installing a Double-Width Connection Blade (Infiniband)

120 Upgrade and Maintenance Manual BX900 S2
Connection blades
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13659-001.fm
Ê Locate the mounting bay for the new connection blade using the information
in section "Connection blade fitting rules" on page 106.
8.3.1.3 Removing connection blade dummy modules
Ê Remove the connection blade dummy modules from the side by side slots
of a fabric as described in section "Removing connection blade dummy
module" on page 113.
V CAUTION!
Keep the dummy modules for future use.
Always replace connection blade dummy modules into unused
connection blade slots to comply with applicable EMC regulations and
satisfy cooling requirements.
8.3.1.4 Installing a double-width connection blade (Infiniband)
Ê Unpack the Infiniband connection blade.
Figure 26: Removing the separating clip