Fujitsu Primergy BX900 S2 - Installing a Single Height; Single Width Blade

BX900 S2 Upgrade and Maintenance Manual 55
Basic hardware procedures
4.6.1 Installing a single height / single width blade
The following describes how to install a BX92x Sx server blade. Storage blades
are installed in the same way.
Figure 6: Installing the BX92x Sx server blade
Ê Undo the locking mechanism of the release lever (1).
Ê Open the release lever (2).
Ê Push the server blade as far as possible into the empty slot (3).
1
2
3