130 Upgrade and Maintenance Manual BX900 S2
Connection blades
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13659-001.fm
Inserting the SFP+ transceiver module
Figure 33: Inserting the SFP+ transceiver module
Ê Insert and slide the SFP+ transceiver module into the socket connector as
far as it will go.
I If only one slot is equipped with a SFP+ transceiver module, use the
primary left connector as shown.
To Next Page
Loading...
