BX900 S2 Upgrade and Maintenance Manual 149
Management Blades
A management blade is removed in the same way as a single-width
connection blade as described in section "Removing a single-width
connection blade" on page 116.
Opening the management blade
Figure 46: Opening the management blade
Ê Press on the touch point (1) to release the lock, and slide the housing cover
as far as it will go in the direction of the arrow (2).
Ê Take off the housing cover.
The management blade components are now freely accessible. The following
figure shows the position of the battery.
Figure 47: Position of the management blade battery (1)
/
0
/
To Next Page
Loading...
