BX900 S2 Upgrade and Maintenance Manual 65
Basic software procedures
Ê Enter the Backup/Restoration tab.
Ê In the Restore Configuration box select the backup media.
– Select USB, if the backup copy is stored on a USB memory stick plugged
in to the management blade.
– Select Local File, if the backup copy is saved in the file system of the field
service terminal.
Ê Select the backup file and click the Restore button.
If the restore process has been finished successfully, the following message
will be displayed in the Memory/USB Backup Status field.
MMB base configuration restore ok
To Next Page
Loading...
