135
PRIMERGY RX300 S4 User's Guide
• Devices inside the server remain hot after shutdown. Wait for a while after
shutdown before installing or removing internal options.
• The circuit boards and soldered parts of internal options are exposed and can
be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity from your body.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
• If devices are installed or disassembled using methods other than those
outlined in this chapter, the warranty will be invalidated.
To Next Page
Loading...
